Roadracer-Starer Kit Prices

Okay man,

Here are the prices you wanted:

Air Management Kit #1 Price: $950

1 VIAIR 460C
8 3/8 VALVES
1 10 SWITCH BOX
1 PRESSURE SWITCH 110/145
1 RELAY
2 DUAL NEEDLE GAUGES 200psi
1 TANK GAUGE 200psi
50' 1/2 DOT LINE & 50' 1/4 DOT LINE
4 FIRESTONE AIR BAGS
1 5 GAL AIR TANK
1 250psi SAFETY VALVE

Air Management Kit #2 Price: $960

1 VIAIR 460C
4 3/8 VALVES
4 1/2 VALVES
1 10 SWITCH BOX
1 PRESSURE SWITCH 110/145
1 RELAY
2 DUAL NEEDLE GAUGES 220psi
1 TANK GAUGE 200psi
50' 1/2 DOT LINE & 50' 1/4 DOT LINE
4 1/2 FIRESTONE AIR BAGS
1 5 GAL AIR TANK
1 250psi SAFETY VALVE

Air Management Kit #3 Price: $1,240

2 VIAIR 460C
4 1/2 VALVES
4 3/8 VALVES
1 10 SWITCH BOX
1 PRESSURE SWITCH 110/145
1 RELAY CONTINOUS DUTY 100 AMP
2 DUAL NEEDLE GAUGES 220psi
1 TANK GAUGE 200psi
50' 1/2 DOT LINE & 50' 1/4 DOT LINE
4 1/2 FIRESTONE AIR BAGS
2 5 GAL AIR TANKS
1 250psi SAFETY VALVE

Air Management #4 Price: $1,385

2 VIAIR 380C
8 GC Xtreme 1/2 450 psi Valves
1 10 SWITCH BOX
1 PRESSURE SWITCH 160/200
2 RELAYS
2 DUAL NEEDLE GAUGES 200psi
1 TANK GAUGE 200psi
50' 1/2 DOT LINE & 50' 1/4 DOT LINE
4 1/2 FIRESTONE AIR BAGS
2 5 GAL AIR TANKS
1 250psi Safety Valve

Air Zenith Kit Price: $1,140

1 AIR ZENITH 200 PSI COMPRESSOR
8 ASCO 1/2 VALVES
1 10 SWITCH BOX
1 PRESSURE SWITCH 160/200
1 CONTINOUS DUTY RELAY
2 DUAL NEEDLE GAUGES 200psi
1 TANK GAUGE 200psi
50' 1/2 DOT LINE & 50' 1/4 DOT LINE
4 1/2 FIRESTONE AIR BAGS
1 12 GAL AIR TANK
1 250psi SAFETY VALVE
1 WATER TRAP

I can also build whatever type of kit you are looking for. These are just the preset kits I have. So let me know what works for you?

Regards,

Devon

what about cups and brackets?

roadracer wrote:

what about cups and brackets?

You won't need cups unless your bagging an S10??

So here are some bracket prices:

Torsion Front Brackets = $53



Rear Upper Bag Mounts = $40/pair
These are available in Single/Dual Port also have them in a Maltese Pattern



Over Axle Bracket = $27/pair




Thanks buddy, hope this helps!


Devon

I forgot these, if you are doing a bag over axle setup this is something you would be looking for.

They are all sold individually and come in a Single/Dual Port.

Basic Bridge Plate = $14



Flame Bridge Plate = $24



Maltese Bridge Plate = $15




Thanks again.


Dev

thansk dev! now, how do you go about putting all that in? i dont have a clue on how to set up a bag system. do you have one of those air bags for dummies?

roadracer wrote:

thansk dev! now, how do you go about putting all that in? i dont have a clue on how to set up a bag system. do you have one of those air bags for dummies?

No I don't carry those unfortunately.

I know you could figure it out man, and any problems that you run into you could just give me a call and I will help you through it. Plus you've got the BScene and Drop Culture...

You can do it!

You first need to decide what setup you want? Bag Over Axle of Bag On Bar?

Then get all your parts and pieces together. Do you have a welder? You'll need one.

Let me know what you want to do?



Regards,

Dev

whats the difference between over bar and over axle? i mean, like which is better/easier?

roadracer wrote:

whats the difference between over bar and over axle? i mean, like which is better/easier?

Okay, first off this is a topic that has never been proven either way. Each setup has its own pros and cons, and virtually all comes down to the way YOU set it up...

Bag Over Axle
Pros: Easy, Cheap, Minimal Down Time
Cons: Minimal Lift (only as much lift as the bag you have), Rough Ride (which depends on how you set it up)

Bag On Bar
Pros: Excessive Lift (depending on the setup), Comfy Ride,
Cons: Semi-Difficult, Expensive (again depends on the setup), Good amount of downtime

I am sure I have left out a ton of information on the pros and cons, but that is enough to get you thinking about which way you want to go.

Each setup is cool in its own right, but again it all depends on how you set it up. I have seen awesome Bag Over Axle setups that ride like a dream and get decent amounts of lift, but I have seen Bag On Bar setups that ride like crap and don't get any lift. And vise versa for the both.

Most ppl you will see run a Bag On Bar setup. That is how mine is setup.

Bag Over Axle is for the person that wants to get there truck bagged and not break the bank. But there are ways to make them wicked sweet and get good lift.

I honestly think that you would be more than happy with a Bag Over Axle, but if you think that you will want to change it in the future then I would venture into the Bag On Bar setup....which might be better if you continue to do AutoX....

So, those are my two pennies....


Dev

well said dev. i was going through this not long ago. i have decided to go bag on bar setup. i figure if im goin to tear it all apart i misewell put a little more time and money in to it and get more lift and nicer ride. if you are like me i didnt know anything hardly about bags except they went up and down. i've been researching for a few months now asking all kinds of questions and talking to alot of people. i think that i will be able to do it now with minimal problems but everyone here and bscene will help endlessly. also if you are like me everytime i get a lump of cash to spend on the truck something happens and i have to spend the money in another area of my life. so what i have started doing is looking for deals and sales and buying piece by piece. hope this helps.



-justin

justin, how much lomnger before you think you are going to get into doing your set up? you are going to take lots of pics and such, right? i think i will probably to an axle setup, but its the front end work that im most concerned about.
Dev, thanks for all the input!! i have a buddy that wants to bag his late model S10. can you email me a price list for him as well. that way i can print it off for him. thanks in advance!!!!!

um it is going to be awhile before i can get it all up and yes i plan on taking pics as long as i dont get carried away with working on it like i tend to do. right now ive got medical bills piling up from my motorcycle wreck so i have to tend to these first. once bills are caught up then continue buying things to bag. i will take pics but just remember this is my first bagging job so unless it all just comes naturally and insanely good work i would rather you not take it as a learning experience. lol do not want to be held accountable if something goes wrong.



-justin

just looking for a direction.

roadracer wrote:

Dev, thanks for all the input!! i have a buddy that wants to bag his late model S10. can you email me a price list for him as well. that way i can print it off for him. thanks in advance!!!!!

Okay, first I forgot to add that you will probably be needing a bridge kit of some sort if you do a Bag Over Axle....but since you already have a notch put in then you could easily just make your own. It would look something like this:



Price ranges from $160-$180

And as far as a price list for your buddy just use everything above, but leave out the Torsion Brackets and add these:

S10 Front Bag Cups Single/Dual Port = $63



So hope that helps you out.....

Regards,

Devon

devon, work me up a quote, with bag on bar setup. will i need torsion bar set up ? need to get a good idea of exact costs to show my wife. thanks, dale

roadracer wrote:

devon, work me up a quote, with bag on bar setup. will i need torsion bar set up ? need to get a good idea of exact costs to show my wife. thanks, dale

Dale,

I based this quote off of what I thought you would be happy with and I also took price into consideration. I believe this will be the best bang for your buck, but we can downgrade as well as upgrade. Let me know what you want to do.

Follow the link to check out the quote:

http://thebagshack.net//catalog/shopping_cart.php

This does not include shipping which to me (Idaho) is $250, so I would think $300 would be a safe guesstimate...

Also I am not sure what fittings you will need, so I can help you at when you get to that point, or I have fitting packs for roughly $150-$200 depending.

I hope this helps you get an idea of what your are looking at exactly....

Regards,

Devon

devon, its just a blank page. do i need to go through anfd pick every thing out that you listed in the posts?

Hmm... I thought it would work

Well here is the breakdown for you:

Air Management Kit #2 = $960

http://thebagshack.net//catalog/product_info.php?products_id=87

Economy Triangulated 4-Link Fully Adjustable = $245

http://thebagshack.net//catalog/product_info.php?products_id=30

Front Torsion Brackets = $53

http://thebagshack.net//catalog/product_info.php?products_id=185

Rear Upper Bag Brackets = $40

http://thebagshack.net//catalog/product_info.php?products_id=186

Front Shock Relocation Kit = $30

http://thebagshack.net//catalog/product_info.php?products_id=240

4-Link Bar Bag Brackets = $27

http://thebagshack.net//catalog/product_info.php?products_id=159



Total = $1,355



Devon

thanks devon! that really helps.
dale