just thinking

hey guys never posted on here but been lurking around i have a 1990 mazda b2200EX cab static dropped for now. I had a question, the rear has 4 inch blocks and two leafs gone but its still two or three inches away from tucking the way i want it too.. Any thoughts would be great . What else can i do to drop it that last couple inches??? Can i flip they leaf springs? I really dont know much about this except that i need more and im to broke to bag it. thanks in advance.

got under there and took off one more leaf and bam looks good wheels tuck about 2 inches into the fender now, no more high butt..

i was going to say pull a leaf but sounds like you got it!

The only way is to pull all the leaves and cut the bump stop down to the top of you u-bolts. Don't flip the leaves, in time the will break. good luck with the drop

Have to check the mazda out for sure, but on Nissan trucks, you can relocate the front spring hanger bolt location up, and back just a bit, and it will give you an additional drop. That would also allow you to put one leaf back in and basically achieve the same drop, but with a little better ride from increased dampening. Also make sure you've changed your shocks out to a good drop shock, that's the right size for the amount of lowering.